RADDLE
Fits in the beater (2
dents per inch) Used to spread the warp when beaming. It has open top which can be covered
with top of beater.
| 6258-1000 | 15¾" (40 cm) |
| 6258-2000 | 22" (56 cm) |
| 6258-9000 | 24" to 32" (60 cm to 80 cm) |
| 6258-4000 | 36" (90 cm) |
| 6258-5000 | 45" (115 cm) |
| 6258-6000 | 60" (150 cm) |
PADDLE
Used for warping with more than four
ends (up to twenty threads).
You make the cross by sliding the yarn up
and down in the slot.
6148-1000
Used for warping with more than four
ends (up to twenty threads).
You make the cross by sliding the yarn up
and down in the slot.
6148-1000
DROP SPINDLE
A beautifully balanced spindle,
in naturally finished hard wood.
Whorl : 3½" dia. (9,5 cm)
Shaft: 14" long (35,5 cm)
6170-2000
A beautifully balanced spindle,
in naturally finished hard wood.
Whorl : 3½" dia. (9,5 cm)
Shaft: 14" long (35,5 cm)
6170-2000
THREADING HELPER
Used as a harness stabilizer and a support for the lease stick and raddle; It holds the cross at a convenient height during the threading. May be used in a variety of configuration as shoon above.
6147-4000 (2 pieces)
Used as a harness stabilizer and a support for the lease stick and raddle; It holds the cross at a convenient height during the threading. May be used in a variety of configuration as shoon above.
6147-4000 (2 pieces)
SHAFT STABILIZER
Used on counter-balanced and countermarch looms to keep shafts at same level and distance while threading.
6147-3000