WARPING MILL & WARPING BOARDS

CANADIAN PRICE (.PDF files)

US PRICE (.PDF files)


VERTICAL WARPING MILL
The reels are the fastest way of making chained warps with a variation of threads and colors. We use them for making warp according to number of turns in winding or twisting. The cross sections that hold the pegs may be adjusted up or down, depending on the warp length. When the mill is not in use, the cross sections and pegs can be removed so that the mill folds to occupy a very limited space.
warpm7p.jpg (20316 octets)
click picture
Table model gives 2 yards (1,8 meters) per turn and can warp up to 22 yards long.

Height:38" (96 cm)
Width: 26¼" (67 cm)

6340-2000
Floor model gives 4 yards (3,7 meters) per turn and can warp up to 50 yards.

Height:68" (173 cm)
Width: 59" (150 cm)

6340-4000

WARPING BOARDS (now in 3 different sizes)
These warping boards are sturdily constructed, and are easily knocked down for storage. They can be used flat on a table, or hung on a wall.

click picture

These warping boards are very sturdily constructed, and are easily knocked down for storage. They can be used flat on a table, or hung on a wall.

6345-0000 Can make up to
6.5 yds long of warp.
 22¾" x 20"     

6345-1000 Will accommodate a warp up to 13 yds (12m)  
 22¾" x 40½"

6345-5000 For warp up to 21 yards long
22¾" x 64" 


WARPING PEG
For warping small warps,
clamp to top of table.
6346-1319